Online meeting software - part 2

Remote desktop services price

The "File Transfer" to resume copying files in the case of a bond is the place where the copy was aborted. Therefore, you do not need to start the whole process over again.business remote access If you want to resume copying the file after the restoration of communications, simply drag the file into the same folder. The program will inform that part of the copied file already exists, and will prompt you to either continue on up, or start it from scratch. This feature is especially useful when copying large files. If you need to leave the office - just put up the file on the pause and the next day, just after returning to resume a suspended up space.

Remote desktop services price

File compression for faster transfer

Our program compresses the files before you transfer them between computers. This is done by fast compression algorithm, which does not reduce the performance of the program, and at the same time provides a good compression ratio. Moreover, it significantly reduces the network load, traffic volume and considerably increases the speed of transmission in networks with low bandwidth (eg, dial-up connection.) Data is transferred between computers in a compressed form, and thus have a smaller volume.

The function of our program, "Sharing halyards" intellectually undeveloped: it "understands" the most common extensions (eg, zip, jpg, gif, avi, etc.) And does not compress them again, which in turn helps avoid needless waste of time for re-compression.

The compression function of our program compares favorably with our competitors' solutions. Usually, the algorithms of file compression competitive products do not compress files before sending them over the network. Therefore, file transfers can be a lengthy process for networks with low bandwidth.

Dynamically adjust the size of the data buffer to increase the transmission rate

The function of our program, "File Sharing" constantly assesses the connection speed. According to the results, it dynamically changes the size of the data buffer, which results in a maximum data transfer rate.

Vnc for pc - part 3

Remote support tools

To prevent unauthorized access from the PC Host-module configuration program can assign a password to access the managed computer, set the option to request permission to establish a connection, allow full access to your PC or just view and configure a filter IP-addresses that are allowed to access the PC (only for direct connection mode).vnc for pc

Among other interesting features of the program - encryption for remote management of PCs. Thus, all data is encrypted using an algorithm RC4 (128-bit key), and for user authentication algorithm is used CHAP.

Remote support tools

The program supports the use of a common clipboard between the managed computer and the PC from which you control. In addition, it is possible to exchange files between computers.

Note that in some cases to obtain small business remote access to your computer over the Internet requires a detailed configuration of firewalls and routers, so we would not argue that the program can easily "breaks through" all firewalls and routers.

Actually, the problem of the connection between computers over the Internet almost always occurs when a managed computer is located in the local network protected by a router, and control computer is located, or on the Internet or other network. To solve this problem in the user program is recommended to configure the router port forwarding. And if the internal network protected by a router, there are several computers to be managed externally, then the router must implement the function of the static port forwarding for each of the managed computers, and Host-module configuration on each computer to set a unique port number used by the program. Anyplace Control custom vnc remote desktom software software uses the TCP protocol, while the two ports. The default port is 5279 (base port) and 4279 (the port used for file sharing).

 As an example, consider the case where the internal network protected by a router, there are three computers with installed Host-modules you want to manage, and control computer with installed module is located on the Internet.

Vnc for pc - part 3

Remote support tools

To prevent unauthorized access from the PC Host-module configuration program can assign a password to access the managed computer, set the option to request permission to establish a connection, allow full access to your PC or just view and configure a filter IP-addresses that are allowed to access the PC (only for direct connection mode).vnc for pc

Among other interesting features of the program - encryption for remote management of PCs. Thus, all data is encrypted using an algorithm RC4 (128-bit key), and for user authentication algorithm is used CHAP.

Remote support tools

The program supports the use of a common clipboard between the managed computer and the PC from which you control. In addition, it is possible to exchange files between computers.

Note that in some cases to obtain small business remote access to your computer over the Internet requires a detailed configuration of firewalls and routers, so we would not argue that the program can easily "breaks through" all firewalls and routers.

Actually, the problem of the connection between computers over the Internet almost always occurs when a managed computer is located in the local network protected by a router, and control computer is located, or on the Internet or other network. To solve this problem in the user program is recommended to configure the router port forwarding. And if the internal network protected by a router, there are several computers to be managed externally, then the router must implement the function of the static port forwarding for each of the managed computers, and Host-module configuration on each computer to set a unique port number used by the program. Anyplace Control custom vnc remote desktom software software uses the TCP protocol, while the two ports. The default port is 5279 (base port) and 4279 (the port used for file sharing).

 As an example, consider the case where the internal network protected by a router, there are three computers with installed Host-modules you want to manage, and control computer with installed module is located on the Internet.

Vnc client android - part 2

Custom vnc

How does our program of small business remote access:

You will need at least two computers connected to each other in a LAN or the Internet, and of course our program for small business remote access, installed on both PCs.remote desktop for android The connection between the computers can be installed in two ways:

Vnc viewer

*         Direct connection : small business remote access to a computer using the IP address or DNS name.

*         Online Account Connection : small business remote access to your computer over the Internet using a web-account and an alias on your computer.(IP address is not used). This mode allows you to bypass firewalls, routers and other obstacles.

Once a connection is established, you will see the remote computer's desktop , will be able to control it with your mouse and keyboard, and use the file sharing between your PC and remote.

What and where to install:

The program consists of two modules:

*         Host Module - is installed on your computer that you want to monitor.

*         Admin module - installed on the computer from which you control a remote PC ..

The installation package contains both modules. You can select the module during installation. If desired, you can also install two modules on a single computer. To install it, please follow these instructions:

A.       Sit down at the computer, which will be controlled remotely (Host PC). Download the installation package from our website on that computer and install it on the Host Module.

Two.       Go back to your computer (Admin PC). Download the installation package and install on your computer Admin Module.

If the Host computer is in the same local network as the Admin computer, then you do not need to approach one of them directly to set the Host Module, as You can install it remotely, using the "remote installation". This feature is built into the Admin Module, and you can run it in the "Tools".

Vnc client android - part 2

Custom vnc

How does our program of small business remote access:

You will need at least two computers connected to each other in a LAN or the Internet, and of course our program for small business remote access, installed on both PCs.remote desktop for android The connection between the computers can be installed in two ways:

Vnc viewer

*         Direct connection : small business remote access to a computer using the IP address or DNS name.

*         Online Account Connection : small business remote access to your computer over the Internet using a web-account and an alias on your computer.(IP address is not used). This mode allows you to bypass firewalls, routers and other obstacles.

Once a connection is established, you will see the remote computer's desktop , will be able to control it with your mouse and keyboard, and use the file sharing between your PC and remote.

What and where to install:

The program consists of two modules:

*         Host Module - is installed on your computer that you want to monitor.

*         Admin module - installed on the computer from which you control a remote PC ..

The installation package contains both modules. You can select the module during installation. If desired, you can also install two modules on a single computer. To install it, please follow these instructions:

A.       Sit down at the computer, which will be controlled remotely (Host PC). Download the installation package from our website on that computer and install it on the Host Module.

Two.       Go back to your computer (Admin PC). Download the installation package and install on your computer Admin Module.

If the Host computer is in the same local network as the Admin computer, then you do not need to approach one of them directly to set the Host Module, as You can install it remotely, using the "remote installation". This feature is built into the Admin Module, and you can run it in the "Tools".

Herramienta de asistencia remota - parte 2

Comprar Windows Remote Desktop

Ahora, vnc servidor está listo para aceptar conexiones de Visor de VNC, el acceso a un equipo configurado.

Por el lado del visor VNC para crear una nueva conexión en la configuración o seleccione un ID existente en el campo ID de servidor VNC, a la que desea acceder.conferencia de escritorio Ahora, la visualización de VNC cuando se conecta el módulo siempre utilizará la «Internet-ID».

Para utilizar Internet-ID para una conexión existente en sus propiedades (sección "Configuración básica") para especificar el código deseado y comprobar a su izquierda.

VNC Server

Para conectar directamente y desactivar el mecanismo de Internet-ID, basta con quitar la casilla de verificación a la izquierda de esa identificación en los ajustes de conexión.

¡Cuidado!

Si el servidor VNC

«Mecanismo e involucrados a Internet-ID, que no quiere decir que este servidor no puede establecer una conexión directa. Internet-ID no niega la forma habitual para conectarse, incluso no se cancela, y el mecanismo de la "conexión inversa" Internet-ID -. Apenas una adición a la mano.

Mini en Internet ID de servidor.

Los administradores de sistemas tienen la oportunidad de desplegar su propia empresa en Internet ID de servidor que no depende de los servidores de la empresa «TektonIT». Más información sobre Mini-ID del servidor de Internet, usted no puede.

 

 

Remoteunterstützungstool - Teil 2

Kaufen Windows Remote Desktop

Nun ist VNC-Server bereit, um Verbindungen von VNC-Viewer, Zugang zu einem Computer einrichten zu akzeptieren.

Auf der Seite des VNC-Viewer, eine neue Verbindung in den Einstellungen zu erstellen oder einen vorhandenen ID im ID-Feld VNC-Server, auf die Sie zugreifen möchten.Desktop-Conferencing Nun, VNC-Viewer, wenn Sie das Modul wird immer mit der «Internet-ID».

Um Internet-ID für eine bestehende Verbindung in seinen Eigenschaften (Abschnitt "Grundeinstellungen") verwenden, um die gewünschte ID angeben und überprüfen zu seiner Linken.

VNC-Server

Für eine direkte Verbindung und deaktivieren Sie den Mechanismus der Internet-ID, entfernen Sie einfach die Checkbox links neben dieser ID in den Verbindungseinstellungen.

Look out!

Wenn die VNC-Server

'E-Mechanismus beteiligt Internet-ID, bedeutet es nicht, dass dieser Server kann keine direkte Verbindung. Internet-ID negiert nicht die übliche Art und Weise zu verbinden, einschließlich nicht abzubrechen, und den Mechanismus der "Reverse-Verbindung" Internet-ID -. Nur eine praktische Ergänzung.

Mini-Internet-ID-Server.

Systemadministratoren haben die Möglichkeit, ein eigenes Corporate Internet-ID-Server, die nicht auf den Servern des Unternehmens «TektonIT» abhängt einzusetzen. Erfahren Sie mehr über Mini-Internet-ID-Server, können Sie dort.